Before starting maintenance or installation of electrical equipment should be turned off power and remove the wire from equipment and isolator first for personal safety, check voltage with Multimeter. Because electricity is dangerous. The electrical equipment or wires direct or indirect contact with the power turned ON, the result is serious injuries or sometimes even causes to death. So follow the below steps.
1. PPE (personal protective equipment)
Always wear safety equipment PPE (personal protective equipment) while working time, like Safety Shoes, Googles, Helmet non-conductive Gloves, Coverall dresses etc. and avoid the direct contact with live or energized circuits.
2. Work safety with equipment
Check the voltage in the Isolator output and equipment connection point before maintenance or installation. Equipment should be connected to earth and maintain ‘0’voltage for personal safety.
3. Tools Safety
Conductive tools must be avoided for the electrical work place and must be used Insulated Tools.
The non-insulated tools they use to perform electrical power are saved from electrical shocks. If you use insulation power-damaged devices or current devices, it can cause devices damage and electric shock.
